Skip to content

Launching peels and turning peels explained

Up to date as of November 15, 2026

Why would anyone use two peels?

Because the two jobs want different things. Building and launching a pizza needs a peel that's cool, dry and floured. Turning and taking out a hot pizza means holding a peel near the flames. Those don't mix well on one tool.

Two oven makers split the jobs differently. One recommends having two pizza peels on hand at all times: one for moving cold pizzas into the oven, and the other for moving hot pizzas around.1 The other suggests a perforated peel for launching and retrieving, plus a separate turning peel.2

What does a launching peel do?

It carries the raw pizza. You stretch the dough, set it on the peel, add toppings, and slide it into the oven.

Keeping that peel cool matters. A maker's guide says to keep the first peel at room temperature so the dough doesn't stick to it.1 Another says a "prep" peel stays at room temperature because it doesn't get hot from moving around inside the oven. It adds that this also stops the dough from softening quickly, which can make it stick.3

It's the peel you'll reach for when you're building the pizza. The dusting options have their own page.

What does a turning peel do?

One maker describes its turning peel as small, round and perforated.2 Perforated just means it has holes.

The same maker says that means you can be more nimble with your turns, and the pizza spends less time outside the oven and away from its heat.2

Turning mid-bake is also how some makers suggest getting the edges to puff evenly.2 Check your oven's manual for how it wants you to handle a pizza while it cooks.

What do the makers call the second peel?

One guide calls it a "warm peel", used for turning and retrieving hot pizza.3 Another maker calls it the one for moving hot pizzas around.1 The names differ, and the makers divide the work differently.

Can one peel do both?

For a while, yes. One maker describes its classic aluminum peel as all-purpose, good for stretching, topping, turning and retrieving. It says that peel works moderately well for rotating a pizza mid-bake, but not as expertly as a turning peel.2

That's the trade-off. With one peel, the same tool goes from cool dough work to hot oven work. The cool-peel advice above is then harder to follow.

How two peels share the workBuild the pizza on the cool peelLaunch it onto the hot floorTurn it with the small peelLift it out with the peel your maker recommends for retrieving
One peel stays cool and dry. The other lives near the heat.

How do I decide?

Think about how you'll bake. One guide says a second peel keeps the prep peel at room temperature, because the prep peel "doesn't get hot from moving around inside the oven".3 If that sounds useful, plan for two.

You can also start with one and add a turning peel later. One maker says its turning peel is a good addition once you already have a launching peel.2

Whatever you buy should suit your oven, and the sizing page helps with that. The launch steps show where each peel comes in.

Notes and sources

  1. Tips for Launching Pizza, Fontana Forni USA
  2. How to Pick the Right Pizza Peel, Ooni Europe
  3. 9 Tips for Launching the (Almost) Perfect Pizza, Ooni Europe